Below is a custom pool enclosure located in upstate NY. The 30' wide x 51' long x 10' eave ht. / 15'-6" ridge ht. structure is engineered for local 50 psf ground snow loads and 90 mph wind loads. Some features include fixed 1" high performance low-e tempered insulated glass and aluminum faced foam-core panels, 25mm multi-wall polycarbonate roof glazing, 7'-3" x 12' wide folding glass walls, sliding and awning (crank open) windows, glass transom (located above the doors all around) with internal grids and an attached vestibule-equipment room to enter from the house. The structure included a custom beige baked enamel paint and cultured stone wrapped corners. In-Floor hot water radiant heat augmented with a ducted forced air heat/dehumidification system was installed to supply plenty of dehumidified heat for a comfortable year-round swimming environment. The 16' x 35' swimming pool had a built-in motorized pool cover to shut down the excess moisture during night time and non-swim times. Photos progress from delivery through installation then completion.
