Swimming Pool Enclosures

POOL AND SPA COVERS

A pool or spa cover is recommended for indoor pools for a few reasons:  (1) To control the humidity (condensation) inside the enclosure when the pool is not in use.  According to ASHRAE - room air temperature must be a minimum 2 degrees warmer that the water temperature to keep condensation controlled.  (2) By covering the water you can lower the ambient room temperature during the colder nights or winter days and save on energy costs to heat the environment and water. 

VIRGINIA POOL ENCLOSURES

Pool Enclosures, Inc. manufactured the custom 33' deep x 51' long "lean-to" or "shed-roof" style  pool enclosure shown below.  The enclosure was designed to accomodate the house off-set.  Note the custom compound-pitched left hand roof bay to match the house overhang...the flexibility of the polycarbonate roof glazing and gasketed rafter glazing caps allows for this... an insulated tempered glass roof would not achieve this result.

Custom Swimming Pool Enclosure

Pre-assembly of segmented end (faceted) swimming pool enclosure

IDAHO POOL ENCLOSURES

Conservatory style swim-spa and fitness room with double transom, energy efficient high performance low emissivity dual pane glass and 25mm multiwall polycarbonate glazing.  Custom beige color, attached walkway and cultured stone faced knee wall blends architecturally with the house.

CLICK IMAGES FOR MORE INFO          

Links Resources

 
 Please Email for Link Exchange Request
 
Pools & Backyard
Garden Life Pro Magazine
Home and Gardening advice from the Experts
Blue Haven Pools and Spas
Ranked #1 Pool Builder in the U.S. - Custom swimming pool construction and inground designs.

NC. POOL ENCLOSURES

Below are just some of the swimming pool enclosures manufactured by Pool Enclosures, Inc. 

CLICK ON THE IMAGES FOR MORE INFORMATION


A recently completed gable shaped pool enclosure adjoined to a new equipment / bath room.  The attached wood-framed room was built by the owner's contractor and will house the pool equipment, dehumidification unit and a bathroom. This is an ideal way to provide ducted-in heat and dehumidification into the enclosure.  Instead of aluminum or gavanized ductwork the owner opted for fabric duct-sox that blends well with the colors of the enclosure. The pool enclosure is 30 miles north of Durham, NC. and also includes a horticultural greenhouse attached to the opposite side of the equipment room.

A gable-attached pool enclosure is the best method when considering dehumidification, equipment rooms and bathrooms.

 


Swimming pool enclosures manufactured by Pool Enclosures, Inc. meet or exceed all local snow and wind load requirements.  Structures are supplied with P.E. stamped drawings for each state. 

Don't compromise on light weight or non-engineered structures that insurance companies won't cover. The above structures were engineered for high snow, wind, and seismic loads. 

Click for Drawing Example


 

Architect, Western North Carolina

Homesmith Architecture

Registered Architect 

 

Frank Kelsch

224 Grove St. #G

Hendersonville, NC. 28792

Ph. 828-697-5985

E-mail [email protected]

Commercial, Residential, Multi-Family, Fitness Centers

Syndicate content

 PEI also manufactures and installs custom natatoriums, spa enclosures, solariums, skylights canopies and porte-cocheres. 

Pool Enclosures, Inc.Mills River, NC 28759877-734-2006Contact Us

HOMEPortfolioCustom Swimming Pool Enclosure • Technical Information & SpecsDehumidificationNC pool enclosures • NC Sunrooms  • Solar Pool HeatersRetractable AwningsRelated InformationAbout UsLinks