Swimming Pool Enclosures

COMMERCIAL POOL ENCLOSURE ROOF REPLACEMENT

The images below show before, during and after photos of a commercial pool enclosure roof placement for a Best Western hotel.  The 25 year old enclosure manufactured by Atria (not PEI) shows 16mm bronze triplewall polycarbonate that had hail damage with mold and dirt between the layers of the panels.  PEI removed the manual rope operated retracting roof panels that were no longer working and the fixed panels and installed "Next Generation" 16mm 5-wall opal polycarbonate with an X-pattern

WISCONSIN POOL ENCLOSURES

Below are photos of a custom conservatory.  PEI structures are engineered to meet or exceed local snow and wind loads.

Pool Enclosure Vestibules

Below are some attached walkways that will allow entrance into a freestanding (stand alone) swimming pool enclosure without going outside.  A vestibule (entryway) creates an airlock chamber that will minimize heat loss and also eliminate excess moisture entering the attached structure.

CLICK PHOTOS FOR MORE INFO

Other Products

Below is a sampling of some products offered by Pool Enclosures, Inc.

CLICK IMAGES FOR MORE INFO

  LEAN-TO PORTE COCHERE

Glass Swimming Pool Enclosures

PEI manufactures and installs custom glass conservatory style swimming pool enclosures as shown below.  The enclosure features an extra tall  9' eave height allowing a glass transom above the 7' x 18' stackable sliding glass door.  Other options include sliding windows, ceiling fans, internal window grids between the glass to simulate a divided lite look, self-cleaning glass,

  • Read more
  • MICHIGAN POOL ENCLOSURES

    Below are various shapes of swimming pool enclosures, such as:  Gabled, Lean-to, and Conservatory style.  Options include: 1" tempered insulated low-e (high performance) glass, sliding glass doors and windows, motorized retracting roof panels, fans, dehumidification, hanging stainless steel gas heaters and more.

    CLICK IMAGES FOR MORE INFORMATION

    POOL ENCLOSURE CEILING FANS

    Ceiling fans circulate stratified air ( hot air that is trapped near the ridge) of the pool enclosure or sunroom.  Heaters will need to work harder to even the temperature resulting in extra fuel cost.  These fans push air down without crating a draft (when ran in forward not reverse).  Our fans are corrosion resistant - water rated.

    Fans will also keep the air quality and humidity in check by moving the air around the swimming pool and reducing condensation, mold, mildew and disperse chloramines.  

    CONSERVATORY INTERIOR

    Below are some interior photos showing a conservatory (faceted roof) style pool enclosure with tile floor and attached walkway.  More photos coming soon will show a separate swim spa, hot tub, and exercise equipment.

    MISSISSIPPI POOL ENCLOSURES

    BELOW ARE PHOTOS OF A 37' X 67' FREESTANDING POOL ENCLOSURE CONSTRUCTED IN N.E. MISSISSIPPI. 

    CLICK ON IMAGES FOR MORE INFORMATION

    POOL ENCLOSURE SNOW LOADS

    Manufactured extruded aluminum frame, polycarbonate or glass roof swimming pool enclosures engineered to meet high ground snow / roof live loads and wind speeds. The photo below was taken after the blizzard of 2013 in northeastern Canada.

    Syndicate content

     PEI also manufactures and installs custom natatoriums, spa enclosures, solariums, skylights canopies and porte-cocheres. 

    Pool Enclosures, Inc.Mills River, NC 28759877-734-2006Contact Us

    © 2009-2010, Pool Enclosures, Inc. • Website Development by InterLink Web Works

    HOMEPortfolioCustom Swimming Pool Enclosure • Technical Information & SpecsDehumidificationNC pool enclosures • NC Sunrooms  • Solar Pool HeatersRetractable AwningsRelated InformationAbout UsLinks